How to Make Your Own Dog Mask – The Basics

In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the home, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it’s actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Be sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.

Then it is time to glue the mask on your dog’s head. First you will need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Make sure that it’s quite http://litwchina2017.goputney.com/?p=1408 powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Make certain the ears are level and be sure that it’s not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask because your pet security, you will have to do some sanding to make sure that it’s secure on your dog. You can do it by sanding off any excess paper which might have been eliminated from your mask.

Leave your comment

Please enter your name.
Please enter comment.
ÚLTIMAS POSTAGENS